Aanbieding!

DAVINCY HYDRO140 14KW PELLETKACHEL MET CV AANSLUITING

2.279,64 2.613,60  incl 21% BTW

levertijd 8-10 dagen

Vergelijk

Beschrijving


handleiding nl

Davinci
CV pelletkachel
brochure op isuu

davinci
usermanual pdf

gebruiksaanwijzing
pdf nl

installatievoorbeelden
davinci hidro pelletkachels

functiedavincidisplay

TITAN TRADING is reeds meer dan 5
jaar
importeur van Davinci pelletkachels, kwaliteit kachels geproduceerd
door een familie bedrijf in Bulgarije met gerenomeerde electronische
componenten van de Italiaanse fabrikant; Micronova. de kachels voldoen
aan de hoogste standaards
EN14785,EN303-5,EN13445 EN60335 EN50165.
TITAN TRADING geeft 2 jaar garantie op fabrieksmankementen.

DAVINCIDAVINCI
cv pelletkachels staan voor stijl.zijn makelijk te bedienen,efficient
en millieu vriendelijk .Een millieu bewuste manier om uw woning te
verwarmen.Bij de design is speciaal rekening gehouden dat een groot
mogelijke overdracht plaats vindt tussen het vuur en het water.Waardoor
neerslag van roet op het vensterglas wordt vermeden en een optimale
werking van de ingebouwde warmtewisselaar plaats vindt.De assemblage
geschiedt door hoog gekwalificeerde vakmensen met gebruik van beproefde
Italiaanse componenten.Een Davinci cv pelletkachel is een aanwinst voor
ieder modern interieur.
Voor een stand alone of nieuwe installatie kunnen de Davinci
pelletkachels geleverd worden met een optioneel ingebouwd cv set /235
euro extra/ Wilt u de Davinci cv pelletkachel installeren in uw
bestaande cv installatie dan is deze cv set niet pertinent
noodzakelijk. kan echter wel dit evt in overleg met uw
installateur.DAVINCI CV pelletkachels zijn leverbaar in de volgende
vermogens;
14kw verwarming voor oppervlakten tot 140m2
18kw verwarming tot oppervlakten tot 180m2
22kw verwarming tot oppervlakten tot 220m2
25kw verwarming tot oppervlakten tot 250m2
zijn
DAVINCI cv pelletkachelsEersteklas
cv pelletkachels
De warmtewisselaar van e Davinci Cv
pelletkachels maakt deze kachel uniek op de markt.
  • Warmtewisselaarbestaat uit een groot aantal
    horizontale leidingen boven deverbrandingskamer, waardoor maximaal
    contact tussen de vlam en hetwater mogelijk is.
  • De warmtewisseling vindt ook plaats via de
    wanden van de verbrandingskamer.
  • De diepte van de pelletkachel is
    gemaximaliseerd en de verbrandingskamer bevindt zich zo ver mogelijk
    van de deur. Dit vergroot het contactoppervlak voor warmtewisseling en
    vermindert de vervuiling van het glas.

Zorg voor het milieu en het behoud van
hulpbronnen

Davinci pelletkachels zijn ontworpen en geproduceerd volgens de
nieuwste inzichten voor verwarming met biomassa. We gebruiken een fusie
tussen moderne technologie en speciale zorg voor het milieu om te
zorgen voor:

  • De bescherming van het milieu en onze toekomst.
  • Betere verwarming tegen een lagere prijs,
    dankzij pellets.
  • Eenvoudige hanteerbaarheid van hout pellets als
    brandstof.
  • Minimaal roet en as in en na verbranding.
  • Minimale schadelijke uitstoot van CO in de
    atmosfeer.
  • De productie van pellets is een ecologisch
    verantwoord proces.

.aansluiting:een Davinci CV
pelletkachel kan eenvoudig in uw bestaande cv installatie
tussengeschakeld worden als een radiator.
uw
loodgieter of wij installeren de kachel op uw 22mm cv leidingen maakt
niet uit waar in uw huis deze verbinding gemaakt wordt. voor de
rookafvoer ; via een verloop van 80mm naar uw bestaande
rookafvoerkanaal ,of een nieuwe rookafvoer met 80mm buizen.

Voordelen:*programeerbare
dag/weektimer.
afstandsbediening.*simple
as een radiator in uw bestaande cv installatie tussen te schakelen
*betrouwbare italiaanse
techniek

Economie: 2kg houtpellets is
ca 10kw verbrandingswaarde,
gemiddeld
kost 1kw dan ca 6 euro cent.
vergelijk
met gasverwarming:
1m3 gas geeft ca 10kw
vergelijk de kosten.

Voor een stand alone of nieuwe installatie
kunnen de Davinci pelletkachels geleverd worden met een optioneel
ingebouwd cv set /235 euro extra/ Wilt u de Davinci cv pelletkachel
installeren in uw bestaande cv installatie dan is deze cv set niet
pertinent noodzakelijk. kan echter wel dit evt in overleg met uw
installateur.
DAVINCI CV pelletkachels zijn leverbaar in de volgende vermogens;
14kw verwarming voor oppervlakten tot 140m2
18kw verwarming tot oppervlakten tot 180m2
22kw verwarming tot oppervlakten tot 220m2
25kw verwarming tot oppervlakten tot 250m2
opptioneel kunnen wij water/lucht warmte wisselaars leveren hierdoor is

wij leveren door heel Nederland en Belgie.
contact ;TITAN TRADING
mobiel /whatsapp; 0653327400


GENERAL INFORMATION

The stove is designed for burning pellets in a small
percentage of pits and dried maize in a mixture with pellets.
Almost the entire part of the thermal power of the
fireplace is concentrated in the water jacket of the heating main
coolant-water. A too small part of power radiates from hearth. This
power through infrared radiation and convection can warm the room in
which the fireplace is located.

DESCRIPTION

Pellet stoves “DA VINCI” are
designed and manufactured according to the latest contemporary concepts
for heating with biomass, the utmost respect nature and the environment
and at the same time facilitating the user, given the high calorific
value per unit volume of fuel, its convenient transportation, the
minimum quantity of soot and ash in combustion and last but not least
– the separation of minimum quantities of harmful gases
during incineration and also environmentally sound production.
Pellet stoves “Da Vinci” provide
thermal comfort with minimal time for service. They are designed
primarily for use in urban environments, where porting and combustion
of wood or coal is inconvenient, cumbersome or polluting. The
combustion process runs automatically, without requiring continuous
surveillance and/or loading. Management and maintenance of the
combustion process is carried out with the help of embedded
microcomputer system supplied from the mains and consuming
insignificant amount of electricity.
Pellet stove “Da Vinci” is intended
for heating of family houses, apartments, offices, production halls and
other similar objects with heat losses from 5-25 kW.
The stove is a modern, high-efficiency and
environmentally sound means for burning pellets (pressed wood chips).
The heating system is with forced circulation of the heating water and
allows the use of both open and closed expansion tanks.

MODELS

Pellet stoves “Da Vinci” are
manufactured in three different with different power:

  • DV 140 AIR (small-14 kW)
  • DV 140 HIDRO (small-14 kW)
  • DV 180 HIDRO (median-18 kW)
  • DV 220 HIDRO (large-22 kW)
  • DV 250 HIDRO (large-25 kW)

The two latest different have the same external
dimensions. The action and the way of management and use of the three
models is the same.

FUEL

The main fuel, which uses the stove, Pellet, but can
also be used dry pits, as well as dried corn. The pits and corn can be
burned in small relative amounts, up to a maximum of 15% of the mass of
the main fuel and mixed with it.

ELECTRONIC CONTROL SYSTEM

The process of burning is controlled using the built-in
electronic system.
At the top of the stove is located in command box to set
the current parameters of combustion and control of the combustion
process. The command box is part of the microcomputer system, control
of the stove.
Electronic management system consists of two blocks:
display, located in the rear part of the upper decorative lid Fireside
and managing block, which is located on the bottom base inside the
fireplace. The two units are connected to each other with the necessary
information and power lines.
The electronic system performs the following tasks:

  • define, select and maintain the power of the stove;
  • powered and operated motor for the venting of the
    combustion chamber;
  • powered, manage and monitor the correct operation of
    the motor drive mechanism, screw conveyer;
  • monitor certain internal temperatures in the stove
    and when they exit outside the predefined tolerances generates
    appropriate corrective actions;
  • protecting and providing safety of shafts stove in
    incorrect handling of user;
  • submit appropriate messages in exceptional events
    leading to errors in the work of the stove;
  • provides a programming service of the combustion
    process.

SETTINGS AND MODE OF OPERATION OF THE STOVE

The power of the stove can be changed in nine grades
ranging from 1 to 9. Each level of power is associated with a flow of
air that ventilates the combustion chamber, the low rate is that in 1st
grade, and the highest in 9th grade. Provision of prescribed flow-rate
is accomplished by changing the speed of rotation or the power of the
drive motor.
In order to achieve a power of the stove, it is
necessary to burn a certain amount of pellets per unit time. The
increase in power is achieved by increasing the quantity of fuel
supplied. The fuel is fed through the periodic rotation of the screw
mechanism that transports the pellets from the hopper to the combustion
chamber.
The Auger is driven by electric motor with reducer.
Operation of the engine is periodic, with two phases: stroke and pause.
The move is depending on the degree to which working stove. The power
is changed by changing the time during which work the Auger mechanism.
This program can be adjusted for an unlimited number of times on
request, with a view to optimizing the process. The experience and
knowledge of the manufacturer indicated that the optimal ratio of
capacity between the 1st and 9th grade moves from 1: 5 to 1: 6, which
in most cases is completely satisfactory. The construction of the stove
allows the receipt of greater ratio (up to about 1: 7), but it is tied
to the quality of the pellets.
The command box is located at the rear of the top
decorative plate on the stove. Its purpose is to implement the
switching on and off of the stove, start and stop the burning process,
setting up and management of all the functions, as well as servicing of
the stove.

ECONOMY, SAFETY AND SECURITY

The electronic system is designed to work with the
minimum possible cost of electricity using modern element base and
cutting-edge technical solutions. Thus is the stove adds to the energy
saving systems and apparatuses.
The electronic system is designed so that it can ensure
the trouble-free continuous work of the stove on 24 hours a day within
the heating season – 6 months.
When the network voltage operation of the stove is
suspended, if it is not equipped with a cigarette lighter and a weekly
programmer. If the network voltage is established the stove in
position. To recommence its work must be lighted again.
Dependence on the presence of mains voltage is an
advantage in terms of safety of operation. Since dropping the network
voltage circulation pump in the heating Highway stops operating if the
stove continue to work, would have created the conditions for
overheating of the water in the water jacket and repeatedly increasing
pressure due to the steam phase. In this sense, the dependence of the
network and the suspension of work in the absence of mains voltage can
be regarded as a defensive feature of the stove.

 

The system provides
the required custom
features-measuring, set, monitor and maintain the desired temperature
in heated premises, able to compile user programs for work of the stove
at the power level or the value of the temperature in the day time
zones, and also for the current week.

 

MODEL
PARAMETER////
MODEL:
DV
140AIR
DV
140HIDRO
DV
180HIDRO
DV
220HIDRO
DV
250HIDRO
Maximum
value of the effective rated outputRmax (grade 5) – a water
jacket/Home
14/
1 kW
14/ 1 kW18/ 1 kW22/ 1 kW25/ 1 kW
Maximum
constructive regulating ratio Pmax/Pmin (grade 9-grade 1)
1:
6
Minimum
temperature of the water
30
± 2°С
30
± 2°С
30
± 2°С
30
± 2°С
Maximum
temperature of the water
80
± 2°С
80
± 2°С
80
± 2°С
80
± 2°С
Temperature
of the water in which the electronic protection excludes
unconditionally stove
87
± 2°С
87
± 2°С
87
± 2°С
87
± 2°С
Quantity
of water in the water shirt
20 dm³26 dm³30 dm³30 dm³
Maximum
working pressure in the water shirt
2 bar2 bar2 bar2 bar
Width
of
the stove
55
cm
55 cm58 cm58 cm58 cm
Height
of
the stove
95
cm
95 cm100 cm100 cm100 cm
Depth
of
the stove
60
cm
60 cm66 cm66 cm66 cm
Weight
of
the stove
70
kg
90 kg105 kg120 kg140 kg
Fuel
consumption
0,7
÷ 3.2 kg/hour
0,7
÷ 3.2 kg/hour
0,7
÷ 4.0 kg/hour
0,7
÷ 4.6 kg/hour
0,7
÷ 5.2 kg/hour
The
diameter of the smoke flue shall be checked
80
mm
The
amount of pre-accession nozzles
1
Minimum
draught of the chimney
15
Pa
Volume
of
ashes
1
dm³
Supply
voltage
~
220V ± 10%
Consumed
electric power from the supply network
100
W
Class
of
protection against defeat by electric current in BS 63/1-90
1
.

 

Extra informatie

Gewicht100 kg
Afmetingen60 × 60 × 110 cm
cv set

met cv set, zonder cv set

kleur

antraciet, bordeau rood

Andere suggesties…